Thesinkis an inconspicuous place that most people may not pay attention to, but it cannot be underestimated in the kitchen. It is related to the convenience of future life. Below, the editor will introduce several precautions for choosing a sink.

Tip 1: Size of the sink

The length is not a big issue to pay attention to, but the width is very important. The width should refer to the width of the cabinet countertop. The standard countertop width is 55CM and 60CM. If there are special circumstances, the countertop in old houses is mostly 50cm. The width of the sink selected for a 55CM countertop should be within 45CM, while the width of the sink selected for a 60CM countertop only needs to not exceed 50cm to be installed. However, the width of the sink selected for a 50cm countertop is relatively narrow, with a maximum width not exceeding 41CM, which is very important.

Tip 2: Material of the sink

The sink, also known as the kitchen basin, needs to be made of steel with a grade of 304. Due to the low carbon content of 304 steel, its flexibility is good. It can be said without exaggeration that this type of steel cannot be penetrated by ordinary handgun bullets. The sinks of several brands entering B&T Home are made of 304 steel, and the thickness of sinks is generally 1.0 mm。

Tip 3: Consumption patterns of sinks

There are two main ways to consume sinks: one is to use water flow to punch them all at once, and the other is to weld them together. Welding can be divided into bottom welding, middle welding, wheel welding, and other one-time stamping sinks. The sink has good sealing performance, but the depth of this sink is not as deep as welding. Usually, the depth does not exceed 18mm, and the deepest bottom of welding can reach 21mm. Therefore, customers and friends should choose a deeper sink and pay attention to the sealing level of welding.

Tip 4: Is there a maintenance coating on the bottom of the sink

The maintenance coating added to the bottom of the sink is used for soundproofing and anti condensation purposes. A better coating is to use mortar to spray the back of the sink as a whole, while a rubber gasket is usually attached to the bottom, which can also achieve a quiet effect.

Tip 5: Installation method of sink

There are two types of sinks, countertop and countertop. Therefore, there are two types of sinks: countertop and countertop. Generally, countertop sinks are made into countertop sinks, but in recent years, the trend of countertop sinks has quietly swept, making them more beautiful and giving people a fresh feeling. The countertop is easier to maintain, but cabinet companies charge more processing fees for countertop sinks. Usually, the on stage basin can be made into both on stage and off stage styles, while the off stage basin can only be made into an off stage style.

Tip 6: How to dispose of the appearance of the sink

After the surface treatment of the sink, its ability to prevent oil stains is greatly enhanced. Common types include frosted surface, pearl silver surface, and whirlpool surface, each with its own characteristics.

Tip 7: Sink Drainage Accessories

The drainage pipe of the sink should be made of PVC.